Pew Bodies
When you choose Woods Church Interiors and Kivett’s you are choosing authenticity and craftsmanship. All furniture is fabricated in our Clinton, NC factory. We have some of the best craftsman in the field.
We offer 4 different body styles all created with some of the most versatile raw materials available. We start with the finest Northern Appalachian Red Oak wood. Contact us to speak to a member of our team about pew ends or pew body options or take a look at a some of the specification options for our pew bodies below.
100 Body Style – Solid Oak
Solid Northern Appalachian Red Oak straight inclined back.
Solid Northern Appalachian Red Oak contoured seat.
Specifications for Architects:
MATERIAL: All material shall be red oak unless other materials are specified. All lumber members shall be ripped from plain sawn boards when applicable. All lumber to be air-dried to moisture content of 20%. The stock shall then be kiln dried to moisture content of 6% to 8%. The assembled stock shall be free of large knots and major blemishes. Pin knots and other character forming marks shall be permitted.
PEW BODY: The pew body shall be Kivett Body #100. The seat shall be 5/4” contoured solid oak. The back shall be of 4/4” solid oak. The back will have standard incline, flat and shall be finished on the top edge with a solid member, backed upon the underside with a solid hardwood mold. The molded members shall be machined, glued and mechanically fastened. The pew body will be continuous up to 12 feet. Pew bodies over 12 feet will be center or offset jointed.
200 Body Style – Padded Seat
Solid Northern Appalachian Red Oak straight inclined back.
Cushioned upholstered seat built on a hardwood-boxed frame.
Specifications for Architects:
MATERIAL: All material shall be red oak unless other materials are specified. All lumber members shall be ripped from plain sawn boards when applicable. All lumber to be air-dried to moisture content of 20%. The stock shall then be kiln dried to moisture content of 6% to 8%. The assembled stock shall be free of large knots and major blemishes. Pin knots and other character forming marks shall be permitted.
PEW BODY: The pew body shall be Kivett Body #200. The seat shall be fully upholstered utilizing Kivett box frame construction. The back shall be of 4/4” solid oak. The back will have standard incline, flat and shall be finished on the top edge with a solid member, backed upon the underside with a solid hardwood mold. The molded members shall be machined, glued and mechanically fastened. The pew body will be continuous up to 12 feet. Pew bodies over 12 feet will be center or offset jointed.
300 Body Style – Fully Upholstered
Cushioned upholstered back with fabric on the rear of the back. Cushioned upholstered seat built on a hardwood-boxed frame..
Specifications for Architects:
MATERIAL: All material shall be red oak unless other materials are specified. All lumber members shall be ripped from plain sawn boards when applicable. All lumber to be air-dried to moisture content of 20%. The stock shall then be kiln dried to moisture content of 6% to 8%. The assembled stock shall be free of large knots and major blemishes. Pin knots and other character forming marks shall be permitted.
PEW BODY: The pew body shall be Kivett Body #300. The seat shall be fully upholstered utilizing Kivett box frame construction. The back shall be fully upholstered with fabric of choice, using 1” polyfoam bonded to the back with adhesive. The back shall be finished on the top edge with a solid oak cap rail, blind fastened with tongue and groove design.
400 Body Style – Seat and Back Upholstered
Cushioned upholstered back with Solid Northern Appalachian Red Oak-wood on the rear of the back. Cushioned upholstered seat built on a hardwood-boxed frame.
Specifications for Architects:
MATERIAL: All material shall be red oak unless other materials are specified. All lumber members shall be ripped from plain sawn boards when applicable. All lumber to be air-dried to moisture content of 20%. The stock shall then be kiln dried to moisture content of 6% to 8%. The assembled stock shall be free of large knots and major blemishes. Pin knots and other character forming marks shall be permitted.
PEW BODY: The pew body shall be Kivett Body #400. The seat shall be fully upholstered utilizing Kivett box frame construction. The back shall be of 4/4” solid oak. The back will have standard incline, flat and shall be finished on the top edge with a solid member, backed upon the underside with a solid hardwood mold. The molded members shall be machined, glued and mechanically fastened. The pew body will be continuous up to 12 feet. Pew bodies over 12 feet will be center or offset jointed.
Reach Out To Us
Do you want more information or to find out how we can help you? Please reach out to us today!